MPS: Multipoint Spill Container
The Treloar Multipoint Spill Container is used on remote fill point locations at retail sites. Its purpose is to contain any product spills from fill hoses and prevent them from entering the sub soil beneath the driveway.
• Large capacity inner containment box and large outer drainage area to allow uncontaminated rainwater runoff into the subsoil.
• A lower profile box allows for greater pipework fall in retrofit sites.
• Lower profile rubber bellows allow for flexibility of pipework alignment.
• The drain valve is push-to-open which allows for pressure testing of pipework.
• The drain valve steel flexible hose is available for the drain line which allows drainage into alternative elbow location. The hose must be ordered separately
• The use of flexible hose on the drain line allows later removal of the inner box if required for pipework maintenance without breaking concrete.
• The spill container is supplied complete with a 100mm F/F elbow fitted with a 3/4” BSP socket for connecting the drain valve.
• The inner box may be turned end-for-end to change the drain valve location if required.
• The inner box may be inclined to the outer box, this is to provide fall to the drain valve. Alternatively the inner box may be assembled level with the outer box to use the natural fall of the pavement for drainage and minimise the depth of the assembly.
• Fill pipe centres of 360mm allow for ease of installation of adjacent fill elbows
• The Treloar 61ASV/2-80 Vapour Adaptor allows location of the vapour recovery line within the inner box in any one of the bellows locations if desired for greater flexibility.
• The outer box provides a positive edge for forming concrete around the entire box.
• The spill container is fully galvanised for long service life.
61AS Series Tight Fill Adaptors
62TT Series Tight Fill Caps
61ASV/2-80 Vapour Recovery Adaptor
62TTV-80 Vapour Recovery Cap
S013600-002 Bellows Adaptor 80mm
MPSW-2 2 Point Spill Container
MPSW-4 4 Point Spill Container
MPSW-6 6 Point Spill Container
MPSW-2+V 2 Point Container incl Vapour
MPSW-4+V 4 Point Container incl Vapour
MPSW-5+V 5 Point Container incl Vapour
MPSW-6+V 6 Point Container incl Vapour
MPSHA-1 Hose Assembly 0.6m
MPSHA-2 Hose Assembly 0.9m
MPSHA-3 Hose Assembly 1.2m