We have a new break link to replace the carbon Pin on our 17.5kPa model, this simplifies installation and improves accuracy of relief pressure.
Our new service kits are also now available so the vents can be reset after scheduled maintenance.
24kPa - 1 Notch 17.5kPa - 2 Notch
The Treloar 202F emergency vents are used on above ground bulk plant and storage tanks. The emergency vent is an auxiliary to a free vent or pressure-vacuum vent, such as the Treloar 95U.
It acts to relieve excess internal pressure created by overheating, fire and over-pumping etc. These vents meet the requirements of API 2000 code as stipulated in AS 1940.
202F-200-17.5 Emergency relief vent 17.5KPA
202F-200-24 Emergency relief vent 24KPA
202F-200-45 Emergency relief vent 45KPA.
• Emergency vent comes in three emergency relief settings being 17.5kPa, 24kPa and 45kPa.
• Vents can be fitted to a 6” ASA 125 flange, however, we recommend the use of the 202SSF flange adaptor.
• The 202F vent, unlike other emergency vents, will show a failure mode, thus indicating that there are design or operational problems associated with the storage facility.
• The 202F on operating will completely open and remain open giving a maximum capacity of 15,850m3/hr at 17.5kPa. (The 202F has to be manually reset after operating).
• The body and lid are aluminium with the body having a Low-Friction coating to prevent the lid sticking.
• The lid is red for easy emergency observation.
We recommend that the BREAK LINK and O-RING be replaced after any activation of the vent to ensure that it remains compliant.
We also offer a full rebuild kit for routine maintenance or repair work where the vent needs to be removed from service.
R015681-000 : 202F-200-17.5kPa SERVICE KIT, Incl. (Break link 2 Notch, O-ring, Circlips x 2, Roll pin)
R015682-000 : 202F-200-24kPa SERVICE KIT, Incl. (Break link 1 Notch, O-ring, Circlips x 2, Roll pin)
R015925-000 : 202F-200-45kPa SERVICE KIT, incl. (Bar assembly, O-ring, Circlips x 2, Roll pin)
R015924-000 : ALL 202F-200 REPAIR KIT, Incl. (Spring RH LH, Gasket, O-ring, Roll pin, Circlip x 4)
202SSF-200 : WELD IN FLANGE WITH COAMING RING
Click to download the PDF for this product